Precautions when Using the Chinese Truck Crane Wire Rope Clamp

  1. After the wire rope is stressed, it is necessary to carefully check whether the truck crane rope clamp moves. If the wire rope is deformed after being stressed, the rope clamp should be tightened twice.
  2. When using the mobile crane rope clamp, the U-shaped ring part should be stuck on the side of the rope head (ie, the moving head).
  3. When the truck mounted crane rope clamp is not used temporarily, it should be coated with anti-rust oil on the threaded part and placed in a dry place to prevent rust.
  4. When using the small crane rope clamp, be sure to tighten the U-ring bolt until the diameter of the wire rope is crushed by about 1/3.